IJACK EGAS 823 WEG 15HP MOTOR GREASING PROCEDURE

Repeat the following procedure twice each time you grease

1. Stop the motor
2. Clean the grease nipple and immediate vicinity
3. Remove or lift the grease nipple protectors
4. Remove the grease outlet plug (on the back side of the motor)
5. Pump in approximately half of the total grease indicated on the motor nameplate
6. Run the motor for about one minute
7. Stop the motor
8. Pump in the remaining grease
9. Reinstall the grease nipple protectors
10. Reinstall the grease outlet plug
11. Start the motor